SP24 Primo VM IV (PF1) 5.6Kw 48 Volts 5600-48 Off-Grid Solar Island Inverter Regenerated
€513,70 (Tax Excl. .€467,00)
INVERTER FIRST VM IV 5600-48
• Alternating Current Power 5.6kw
• Installable power 6kw panels
• 48V battery pack support
• Supports USB On-the-Go function
• Communication port reserved for BMS (RS485, CAN-BUS or RS232) support for Pylontech US2000
• Replaceable fan design for ease of maintenance
• Supply the load from the grid or the PV, even if the battery is not available
• Use timer and priority of AC / PV configurable outputs
• High power selectable charging current
• Selectable input voltage range for household appliances and personal computers
• Compatible with mains supply or generator input
• Automatic restart while AC is recovering
• Cold start function
- Description
- Additional information
Description
SP24 Primo VM IV (PF1) 5.6Kw 48 Volt 5600-48 Off-Grid Solar Inverter
REFURBISHED TWO YEARS WARRANTY
INVERTER FIRST VM IV 5600-48
• Alternating Current Power 5.6kw
• Installable power 6kw panels
• 48V battery pack support
• Supports USB On-the-Go function
• Communication port reserved for BMS (RS485, CAN-BUS or RS232) support for Pylontech US2000
• Replaceable fan design for ease of maintenance
• Supply the load from the grid or the PV, even if the battery is not available
• Use timer and priority of AC / PV configurable outputs
• High power selectable charging current
• Selectable input voltage range for household appliances and personal computers
• Compatible with mains supply or generator input
• Automatic restart while AC is recovering
• Cold start function
For the Complete Technical Characteristics See the detail below
MODEL
|
3.6KW
|
5.6KW
|
Input voltage waveform
|
Sinusoidal (AC mains or generator) |
|
Rated input voltage
|
230Vac |
|
Low voltage loss
|
170Vac ± 7V (UPS); 90Vac ± 7V (equipment) |
|
Low Return Voltage Drop
|
180Vac ± 7V (UPS); 100Vac ± 7V (Equipment) |
|
High Voltage Drop
|
280Vac ± 7V |
|
High Return Voltage Drop
|
270Vac ± 7V |
|
Max. AC input voltage
|
300Vac |
|
Rated input frequency
|
50Hz / 60Hz (Auto Detect) |
|
Low Frequency Drop
|
40 ± 1Hz |
|
Low Return Voltage Drop
|
42 ± 1Hz |
|
High Frequency Drop
|
65 ± 1Hz
|
|
High Return Voltage Drop
|
63 ± 1Hz |
|
Short circuit protection at the output
|
Differential switch |
|
Efficiency (Line Mode)
|
>95% (Rated load R, battery fully charged) |
|
Transfer duration
|
10ms typical (UPS); 20ms typical (appliances); |
|
Reduction of output power
If the AC input voltage drops to 170V, the output power will be reduced. |
MODEL
|
3.6KW
|
5.6KW
|
Rated output power
|
3.6KVA / 3.6KW |
5.6KVA / 5.6KW |
Output voltage waveform
|
Pure sine wave |
|
Output voltage regulation
|
230Vac ± 5% |
|
Output frequency
|
50Hz |
|
Peak efficiency
|
93% |
|
Overload protection
|
5s @ ≥130% load; 10s @ 105 %~130% load |
|
Overload capacity
|
2 * Rated power for 5 seconds |
|
Nominal DC input voltage
|
24Vdc |
48Vdc |
Cold start voltage
|
23.0Vdc |
46.0Vdc |
Low DC alarm voltage
|
|
|
@ load< 50% |
23.0Vdc |
46.0Vdc |
@ load ≥ 50% |
22.0Vdc |
44.0Vdc |
Low DC Alarm Return Voltage
|
|
|
@ load< 50% |
23.5Vdc |
47.0Vdc |
@ load ≥ 50% |
23.0Vdc |
46.0Vdc |
Low DC cutoff voltage
|
|
|
@ load< 50% |
21.5Vdc |
43.0Vdc |
@ load ≥ 50% |
21.0Vdc |
42.0Vdc |
High recovery DC voltage
|
32Vdc |
62Vdc |
High DC cutoff voltage
|
33Vdc |
63Vdc |
Consumption without load
|
<40W |
<55W |
AC Grid Load Mode |
|||
MODEL
|
3.6KW
|
5.6KW
|
|
Charging current (UPS)
@ Nominal input voltage
|
100Amp (@V I / P = 230Vac) |
||
Bulk Charge Voltage
|
Flooded battery
|
29,2 |
58.4Vdc |
AGM / Gel battery
|
28,2 |
56.4Vdc |
|
Charging float voltage
|
27Vdc |
54Vdc |
|
Charging algorithm
|
3 step |
||
Charge curve
|
|||
Solar entrance |
|||
MODEL
|
3.6KW
|
5.6KW
|
|
Max. PV array power
|
4000W |
6000W |
|
Nominal PV voltage
|
240Vdc |
360Vdc |
|
Starting voltage
|
150Vdc +/- 10Vdc |
||
PV array MPPT voltage range
|
120 ~ 450Vdc |
||
Max. PV array open circuit voltage
|
500Vdc |
||
Maximum charge current
(AC charger plus solar charger)
|
120Amp |
MODEL |
3.6KW |
5.6KW |
Operating temperature range |
– 10 ° C + 50 ° C |
|
Storage temperature |
-15 ° C ~ 60 ° C |
|
Humidity |
5 – 95% relative humidity (non-condensing) |
|
Dimensions (P * W * H), mm |
119 x 313.6 x 422.8 |
|
Net weight, kg |
10 |
12 |
The product can be sold with VAT reduced to 10% exclusively to Italian residents with shipping to Italy Attention the sale price of these products is with 10% VAT in case of purchase you will have to fill in a declaration that the products will be used for a renewable energy system
.
https://www.cercastock.it/repository/_barba_srl_dich_10.pdf
.
.
Additional information
Weight | 11 kg |
---|---|
EAN | 8050030420288 |